Skip to main content
ESPBoards

ESP32 FM DevKit Development Board Pinout and Technical Specifications

Code name: fm_devkit

ESP32 FM DevKit development board is based on esp32 microcontroller and uses xtensa architecture. This development board has a maximum CPU frequency of 240 MHz and a flash size of 4MB.


Features

  • 40 digital IO pins
  • 16 external interrupt pins
  • 16 analog input pins
  • 21 PWM pins

Connectivity

  • WiFi: 802.11 b/g/n (2.4 GHz)
  • Bluetooth: 4.2
  • WiFi: 4.2

Technical specs

Clock Speed240 MHz
Flash size4MB
Microcontrolleresp32
Architecturextensa

ESP32 FM DevKit Pins Mapping Arduino IDE

Below you can find the ESP32 FM DevKit pinout. This development board provides 40 digital IO pins, out of which 16 can be used as an external interrupt pins , 16 as analog input pins and 21 pins have Pulse-Width Modulation (PWM) .

PinAnalogTouchPWMOther
0
1PWMTX
2PWMI2S_MCLK
3PWMRX
4PWMSW1
5PWMLED_BUILTIN
12PWM
13PWM
14PWM
15PWM
16PWMSDA
17PWMSCL
18PWMSW2
19PWMSW3
21PWMSW4
22PWMI2S_DOUT
23PWM
25PWMI2S_LRCLK
26PWMI2S_SCLK
27PWM
32PWM
33PWM
34
35
Analog - Analog input pins
Touch - Touch pins
Function - Function pins
RX / TX - Receive (RX) / Transmit (TX)
LED_BUILTIN - Built-in LED
PWM - Pulse-Width Modulation

Default Tools

Bootloader tool
Uploader toolesptool_py
Network uploader toolesp_ota
Bootloader address0x1000
Flash modedio
Boot modedio
PSRAM type
Maximum upload size
1280 Kb
(1310720 B)
Maximum data size
320 Kb
(327680 B)

The ESP32 FM DevKit development board by default uses esptool_py uploader tool, esp_ota network uploader tool for Over-the-air (OTA) uploads and bootloader tool. The bootloader starts at address "0x1000". Flash mode and boot mode for ESP32 FM DevKit development board by default is dio and dio respectively. When using Arduino IDE, the maximum sketch upload size is 1280 Kb (1310720 B) and maximum data size for variables is 320 Kb (327680 B).